12 volt dash socket

Started by SDHarleydad, August 27, 2018, 09:15:52 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

SDHarleydad

Guest
Logged
SDHarleydad
Guest
My 12 volt dash socket is not working.  Is there a fuse for this?

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
#1
Yes of course. With the rest of the distribution fuses.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

SDHarleydad

Guest
Logged
SDHarleydad
Guest
fuses are good.   Any other suggestions?

REDRIDER

Guest
Logged
REDRIDER
Guest
Quote from: SDHarleydad on August 29, 2018, 12:27:40 PM
fuses are good.   Any other suggestions?
make sure it isn't the item that you are plugging into the socket that is faulty. then it comes down to chasing wiring.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Mine has a bad connector just off from the harness about a foot from the fuse box...at least it has enough resistance to show a volt drop between each side...need to fix that someday...but maybe yours is .."real bad".
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

SDHarleydad

Guest
Logged
SDHarleydad
Guest
Ok, spent the day working on the Unit.  rechecked the fuse.  The fuse was good, but when I looked in the socket to plug it in again, I noticed one side was way down in the block so the fuse wasn't actually connecting.  Pushed it back up, put the fuse back in, and it works just fine!

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Quote from: SDHarleydad on September 17, 2018, 10:59:40 AM
Ok, spent the day working on the Unit.  rechecked the fuse.  The fuse was good, but when I looked in the socket to plug it in again, I noticed one side was way down in the block so the fuse wasn't actually connecting.  Pushed it back up, put the fuse back in, and it works just fine!
Chalk another one up to those fine HQ CFM electrical parts...Glad you got it man. Just goes to show..you can't rule-out anything with these.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube