Won't go over 15 mph

Started by Aaronzar, October 30, 2019, 09:36:54 PM

0 Members and 7 Guests are viewing this topic.

Previous topic - Next topic

Aaronzar

Guest
Logged
Aaronzar
Guest
Hi my name is Aaron. I have a 2011 cf moto 625-3. It will no longer go over 15mph. Engine runs fine,idles and revs up. Has you start to drive and reach 15 mph engine will cut out,and come back at about 10mph. It will drive fine at 12mph, but the min you go 15mph it will cut out. Can someone help me? Thanks

Davydo

****
Senior Member
Posts: 200
Logged
Davydo
Senior MemberPosts: 200
We're you wearing your seat belt?
2021 Cforce 500S,  2016 Zforce 500 HO Trail (sold).

doug80638

*****
Guru
Posts: 930
Logged
doug80638
GuruPosts: 930

Not much to go on ...

Sure sounds like a limiter is engaged, but it could be several things.

Will it go any faster while pressing/holding the limit override switch? (Lower left hand switch I believe)
2017 Zforce 800 - Red
SuperATV Flip windshield
Tusk soft rear window
Uni-Filter foam air filter
Bandit springs

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Yeah that's about the speed and RPMs the limiter holds. Is the reverse light on or the "X" for the 4wd light on the pod? Try holding down the override switch. The diff-loc may be suck engaged or the reverse switch may be bad. If the reverse light is on, the override will have no effect. Unplug it at the switch until you can replace it.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

glenlivet

*****
Guru
Posts: 678
2017 Z-Force 800 Trail
Logged
glenlivet
GuruPosts: 678
Same behavior in low range?
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

Aaronzar

Guest
Logged
Aaronzar
Guest
Quote from: NMKawierider on October 31, 2019, 09:00:28 AM
Yeah that's about the speed and RPMs the limiter holds. Is the reverse light on or the "X" for the 4wd light on the pod? Try holding down the override switch. The diff-loc may be suck engaged or the reverse switch may be bad. If the reverse light is on, the override will have no effect. Unplug it at the switch until you can replace it.
It was the reverse switch. It was unplugged. I plugged it in and everything works fine. THANK YOU.

Aaronzar

Guest
Logged
Aaronzar
Guest
It was the reverse switch it was unplugged I plugged it in and everything works fine now thank you so much for your help