2021 CFMOTO CForce 400

The original winch cable (Warn Winch) was shot after two winters of plowing.  I decided to replace the cable with a synthetic winch rope.  I noticed that the original cable was spooled over the top of the winch instead of the bottom, which explains why the cable was in such rough shape.  I installed the winch rope and spooled it the correct way, and added a new fairlead.  Only problem . . . on the winch control, "Out" now means in, and "In" means out.  Sometimes the solution just stares you right in the face after thinking about it for a day.  I simply swapped the green and black wires on the solenoid, and problem solved.  Now "Out" means out, and "In" means in.

From the picture below, I simply swapped the left and right wires and within seconds, the problem was solved.