Please im hoping someone can help. I have a 2021 uforce 1000 i was installing a switch to go between econ and sport mode. Well i obviously did something i shouldn't of as when turn the key i get nothing. The dash doesn't light up. Horn winch nothing works. I checked the main fuse and its fine. When i pulled the fuse i could here a faint click under the dash. I reinstalled it and nothing. I haven't even had this thing two weeks and already screwed it up
Please if anyone has any ideas what could be wrong. I have removed the switch

[2015 Z Force 800 53/Trail EPS]

Other then check the main fuse holder itself as some had internal connection issues and all the distribution fuses, don't know what else to check. So many bad things could have happened. Modes require special ECMs...which I believe..or I thought.. only the ZForce 950/1000s have. May have just learned an expensive lesson. 

Figured it out. 15amp signal fuse was blown. Replaced that and everything is working

[2015 Z Force 800 53/Trail EPS]

Figured it out. 15amp signal fuse was blown. Replaced that and everything is working

Good deal!

So turns put i had the switch wired in backwards. The 2021 has a different pin connector. Fixed the wiring and now have econ and sport mode with a flip of a switch. 

[2015 Z Force 800 53/Trail EPS]

Even better!

I e been thinking about installing the switch as well. Do you notice a marked difference between Econ and Sport Mode?

Yes i do and for 25 bucks couldnt beat it. More aggressive throttle response

Did your machine come in Eco mode? Mine came in sport mode and I'm looking to get rid of some of that throttle response to make it more user friendly for others when they use it around the farm.

that is good you fixed it what part of nj are you from ?