[REDRIDER]

Finally got a chance to check and see if i had a throttle stop on mine,  i did!   I was getting probably 7/8 throw.  Loosened up the bolt by the top of the pedal so the pedal hits the floor now.   Went from 59mph top speed to 66mph with 2 ppl with 29 inch tires.  Maybe a little more pep at 25 to 30 but kinda hard to tell.  Noticed the difference on top speed tho. Check that your pedal hits the floor!

[Andrew1au]

Depending on what model you have and what country your in, there may be a limiter in the throttle body also.

My uforce 800 went from being able to do 71kmh to 113kmh

http://cfmoto-forum.com/how-to's/how-to-remove-governor/

[REDRIDER]

yea I read this too, but considering my pedal is going to the floor there's no way I have this in my throttle body XD

[Sockman]

yea I read this too, but considering my pedal is going to the floor there's no way I have this in my throttle body XD

Have you checked?  I'm curious if this throttle body stop is on all these machines.  If I can get the mud off mine, maybe I'll check to see if it's easy to get at on the Zforce.

[REDRIDER]

No i didn't look,  but since me pedal is going to the floor there's no way there is a stop in the throttle body. I got 69mph stock before i adusted the pedal now i get more mph than before so I'm on par with everyone else

[Sockman]

No i didn't look,  but since me pedal is going to the floor there's no way there is a stop in the throttle body. I got 69mph stock before i adusted the pedal now i get more mph than before so I'm on par with everyone else

Yeah, I checked the pedal and saw there was a stop there, and adjusted that a bit.  I can tell that at WOT I'm putting a bit extra tension on the cable.  I'm very rarely at WOT.