ahh didnt think of the tires as well! thankss!!
any recommendations to make it softer?
Well, without knowing what you have all I can tell you is what I did to my Z800 53.
1. Tire pressure set to 8psi
2. Shock compressions. Find center between Fast and Slow and set two clicks toward the Fast
3. Shock rebounds. Find the center between Fast and Slow and set two clicks toward the Slow
4. Set Rear shock preloads so that with normal load the a-arms ride at or near their center of travel
5. Set front preloads so the with normal load, front section of main skid plate is level to 1/2" lower then the rear of same skid plate.
6. Make sure all a-arm bushings are well greased and are rotating freely all the time as well as the sway Bar bushings.