Besides being muddy I hope it was fun, I appreciate your help with this and I have enjoyed reading about your modifications and input in regards to helping others solve their issues, mine is in the shop right now but as soon as I get it back I am going to reverse the engine air intake and get rid of some of the heat and noise in the cab, I have hated that vent for 3 years but never thought about reversing it until I saw your post...thanks for that one. I live near the beach where it is always hot and it rains 6 months of the year, that is why I want this windshield so bad, I did order a set of Rodin's doors today which will keep the mud out during the rainy season, between the doors and the windshield things should be almost civilized, at least we never get cold here and there is always a stream, river or waterfalls nearby if things get too hot or muddy.
I checked the part numbers listed at Alpha Sports and they show all Z models using the same part number for the hood 9060-040101 if that is true then the curved bottom contour and width at the bottom of the windshield are exactly the same, maybe I am not being specific enough on my model number but the cages are certainly a different configuration and part number, I have attached a picture of my machine. Because the cages are different I do not know if the width of the Z800 cage at the top of the windshield mounting brackets is the same as mine, what I need to know is the inside dimension of the roll cage at the top of the windshield mounting bracket dimension #3, I also need to know the height from the hood to the top of that mounting bracket dimension #1, this will allow me to measure the inside width of my roll cage and compare it to yours at the same height from the hood. Dimension #2 is the height from the hood to the lower edge of the roof, I want to make sure that my roof isn't lower which could interfere with the window tilting upwards.
