0 Members and 1 Guest are viewing this topic.

*

Offline Cosmosdan

Secondary holding tool
« on: May 31, 2016, 11:17:51 PM »
I made one with pins to start with. With a rusty nut and some force, it broke. This is my new one.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline NMKawierider

Re: Secondary holding tool
« Reply #1 on: May 31, 2016, 11:27:39 PM »
Nice looking.
« Last Edit: May 31, 2016, 11:41:34 PM by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Cosmosdan

Re: Secondary holding tool
« Reply #2 on: June 01, 2016, 02:39:11 AM »
hope it works. We have our first camping/riding trip next week. I'm also hoping that my dealer gets the parts I need in the next day or two or the Z6 is staying home.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline NMKawierider

Re: Secondary holding tool
« Reply #3 on: June 01, 2016, 07:49:39 AM »
Both the breaker bars I broke gave at the head.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Cosmosdan

Re: Secondary holding tool
« Reply #4 on: June 01, 2016, 04:36:25 PM »
I ended up taking the most of the plastic off and the battery box out to get an impact on it. I did find about 10lbs of dirt in and under the battery box. The iron baltic skid plates don't have drainage in that section. I drilled four 1/2" holes under it. Hope that does the trick.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet