Zforce 800 Trail doesn't want to idle

Started by Vipr, July 11, 2021, 07:17:52 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

Vipr

**
Junior Member
Posts: 22
Logged
Vipr
Junior MemberPosts: 22
Hey everyone I have a 2017 Zforce 800 Trail that will not idle when it's ran for like an hour or so. The top end of the motor has been completely rebuilt so only about 500 miles on the top end but since it's been rebuilt I've had this idling problem. It runs hard and strong at first and then after about an hour or so it just will not idle. As soon as you take your foot off the gas it will instantly die. Makes it difficult to back up and go forward etc. I wondered if anyone else has had this issue? I also thought maybe it's getting vapor locked?  Any advice would be greatly appreciated!

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Check the valve lash. Then test the idle air control valve. If all is good test the fuel pressure and compression. What air filter are you using?
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

Vipr

**
Junior Member
Posts: 22
Logged
Vipr
Junior MemberPosts: 22
I have a uni air filter. Just cleaned it and reoiled it

Vipr

**
Junior Member
Posts: 22
Logged
Vipr
Junior MemberPosts: 22
I will look into those other things though. Thanks!