NM to ft/lbs

Started by solomon, May 12, 2023, 01:33:43 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic
Go Down Pages1
User actions

solomon

****
Senior Member
Posts: 163
Logged
solomon
Senior MemberPosts: 163
May 12, 2023, 01:33:43 PM
Is the drive pulley nut really 132.7 ft/lbs? My torque rench only goes to 75ft/lbs....
sol...
2022 cforce 800xc, RNG Stage one kit, Uni filter with cover, Auxbeam led, Nilight Rock Lights Tesseract rear box, Whiskey bent exhaust tip, heat wrapped header. Rival front bumper, Kenda BearClaw Tires 26x9x14(f) 26x11x14(r)

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
May 12, 2023, 03:57:09 PM
#1
Quote from: solomon on May 12, 2023, 01:33:43 PM
Is the drive pulley nut really 132.7 ft/lbs? My torque rench only goes to 75ft/lbs....
sol...
That would be Newton Meters. Use this conversion table to get ftlbs of torque. 97...still a lot higher then mine at 82.

https://www.omnicalculator.com/conversion/nm-to-ft-lb

2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

solomon

****
Senior Member
Posts: 163
Logged
solomon
Senior MemberPosts: 163
May 12, 2023, 03:59:33 PM
#2
The shop manual says 150nm... unless I am reading it incorrectly....
2022 cforce 800xc, RNG Stage one kit, Uni filter with cover, Auxbeam led, Nilight Rock Lights Tesseract rear box, Whiskey bent exhaust tip, heat wrapped header. Rival front bumper, Kenda BearClaw Tires 26x9x14(f) 26x11x14(r)

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
May 12, 2023, 04:38:16 PM
#3
Quote from: solomon on May 12, 2023, 03:59:33 PM
The shop manual says 150nm... unless I am reading it incorrectly....
Seems terribly high..check the table up front and in the section regarding R&R of the clutches. I found sometimes the two are different.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
May 12, 2023, 04:54:16 PM
#4
Just looked it up in both places on the 950s and it said the same thing, 180Nm on drive pulley nut, 60Nm on the drive pulley bolt and 150Nm on the driven pulley nut. Wow...Guess you will be getting a bigger torque wrench.:)

2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

solomon

****
Senior Member
Posts: 163
Logged
solomon
Senior MemberPosts: 163
May 12, 2023, 08:24:08 PM
#5
Already acquired... thanks for the backup big daddy
sol...
2022 cforce 800xc, RNG Stage one kit, Uni filter with cover, Auxbeam led, Nilight Rock Lights Tesseract rear box, Whiskey bent exhaust tip, heat wrapped header. Rival front bumper, Kenda BearClaw Tires 26x9x14(f) 26x11x14(r)

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
May 12, 2023, 08:28:45 PM
#6
Quote from: solomon on May 12, 2023, 08:24:08 PM
Already acquired... thanks for the backup big daddy
sol...
Go slow taking it up there...Chinese metal is.. not like ours.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

solomon

****
Senior Member
Posts: 163
Logged
solomon
Senior MemberPosts: 163
May 12, 2023, 08:49:59 PM
#7
Roger I appreciate it!
2022 cforce 800xc, RNG Stage one kit, Uni filter with cover, Auxbeam led, Nilight Rock Lights Tesseract rear box, Whiskey bent exhaust tip, heat wrapped header. Rival front bumper, Kenda BearClaw Tires 26x9x14(f) 26x11x14(r)

Ulfthednar

*****
Guru
Posts: 261
Logged
Ulfthednar
GuruPosts: 261
May 13, 2023, 08:55:36 AM
#8
Quote from: NMKawierider on May 12, 2023, 08:28:45 PM
Quote from: solomon on May 12, 2023, 08:24:08 PM
Already acquired... thanks for the backup big daddy
sol...
Go slow taking it up there...Chinese metal is.. not like ours.
Not after recycling our scrap it isn't . .
2022 CFMoto CForce 800XC. Lava Orange/Camo Swapped 9x14-27/Fr 11x14-27/RR, Interco Sniper 920, RJWC header. MSC 90 intake.  
2023 CFMoto CForce 800XC Camo/Orange Swapped, Heat Demon grip heater, Turn signal kit, All Balls winch remote kit. RNG Clutch kit w/ Scorpion 3 stage helix. Camso X4S tracks for winter fun. Ice biter chains for destroying asphalt.

solomon

****
Senior Member
Posts: 163
Logged
solomon
Senior MemberPosts: 163
May 13, 2023, 11:21:14 AM
#9
132 ft# is no joke... I couldn't get the wrench to break so I tried it at 120# and no luck so wherever it is at is where it's gonna stay. Black marks are mine the white one was lined up with the black one before it came apart... so now the nut is past the white. I'm guessing  it's closer than it was at the mfg. According to shop manual.
The " Chinese metal  " comment was screaming in my ear.
God hates coward. Will see how she rips.
sol...
https://www.dropbox.com/s/eqyo907i6nbry2z/clutch.jpg?dl=0
2022 cforce 800xc, RNG Stage one kit, Uni filter with cover, Auxbeam led, Nilight Rock Lights Tesseract rear box, Whiskey bent exhaust tip, heat wrapped header. Rival front bumper, Kenda BearClaw Tires 26x9x14(f) 26x11x14(r)
Go Up Pages1
User actions