So I'm looking at light bars and I'm not sure what size I'd like to go with either a 22 inch or a 32 inch and also I'm looking for mounting options on my commander I have a metal roof but have never mounted a light bar to a plastic roof I'm really liking the new light bars with halo rings in them anyway any pics would be cool

[2015 Z Force 800 53/Trail EPS]

I used these brackets on my front one because I needed to fill a 1/2" gap between the plastic roof and the bar. Had to...adjust the rubber a bit because 1.75" is too large and 1.5" is too small.

https://www.amazon.com/gp/product/B00VQ08GFE/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Then I used a 24" light bar mostly because I wanted to keep the amp load low. This one pulls 4.6 amps. I also wanted it to me lower and tucked in closer so I made some custom brackets to do that.

It was like this at first:



But with the custom brackets, it's now like this:

I went with a 32" (sorry no pictures) and i made some small flat metal tabs that are about 3"long that bolt where the front roof bolts down and the other end bolts the light bar to those tabs through the plastic roof.  It makes the light bar ROCK SOLID.  I used the brackets that came on the light bar and it sits about 1/8" above the roof.  Where I mounted it because the roof is sloped down in the front the top of the light bar is the same height as the rear of the roof.  Hope that makes sense.  I will get some pictures tonight for ya.

JJ I'll text you pics of mine.

Im thinking im gonna get one like this

Went wit a 42" on my Uforce800. Mounting brackets landed right on the front gussets on the roll cage so I drilled thru the roof and the gussets to mount it