Air filter issues

Started by DBF Spain, June 20, 2019, 02:20:47 AM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Quote from: rlc on April 21, 2020, 07:59:03 AM
NMK - Just a quick question.  You have a few "add-ons" that require power to operate.  Do you run a second battery?
Nope. They are all small enough in power or amp draw that I have all of them on the one 10amp fused accessory circuit. So even if I had everything on including the light bars...(which I have never used), the power usage is less then 8amps total so no need for a second battery or a larger stator.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

rlc

****
Senior Member
Posts: 214
Logged
rlc
Senior MemberPosts: 214
I was hoping you'd say that.  Thanks.
2019 Z8 Trail - SuperATV Flip Windshield - UniFlow Air Filter - Rayco Door Inserts - Custom Rear Cargo Rack - Custom air intake (fuel side) -

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Quote from: rlc on April 21, 2020, 04:01:36 PM
I was hoping you'd say that.  Thanks.
The only things not on that accessory circuit is the CVT helper fan which is tied-in with a dual USB port I put between the seats for my cameras. And that is powered straight from the battery..on a fused line ..of course.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

NMbuck

Guest
Logged
NMbuck
Guest
Well I finally mounted the particle seperator plumbed it and had a buddy borrow it for ~100 miles as the last of 5 vehicles in dusty northern NM. Stock filter box had a very little dust in it! I is about what 15 miles looked like before! I'm sold on this S&B seperator!

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Nice. I'm about to get mine soon.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

NMbuck

Guest
Logged
NMbuck
Guest
Thanks,

Maybe this is a better picture. I tried to get the tubing completely out of the rear window space.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
I'm going to mount mine something like that but "Y" or "T" off to both of my stacks with 3" Just above the window if I can.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube