[NMKawierider]

I have to apologize..I went out to see where I came back in and discovered that although my first plan was to run it through the center console..like the pic below, I ended up fishing through the side plastics along with the power wires for the fan blower. Kinda..not so fun but with a fish tape and some time it was do-able. Anyway if you fix it to the outside of the carrier bearing housing, then drill small holes ever so often on that edge, then use the small wire ties to afix it to the under side of the floor, smooth side up-clasp below. Then up the forward side of the firewall, then back in either at the column opening or above behind the storage tray..it will work just fine.



   

[574cfmotorider]

I have to apologize..I went out to see where I came back in and discovered that although my first plan was to run it through the center console..like the pic below, I ended up fishing through the side plastics along with the power wires for the fan blower. Kinda..not so fun but with a fish tape and some time it was do-able. Anyway if you fix it to the outside of the carrier bearing housing, then drill small holes ever so often on that edge, then use the small wire ties to afix it to the under side of the floor, smooth side up-clasp below. Then up the forward side of the firewall, then back in either at the column opening or above behind the storage tray..it will work just fine.



 

No worries.  I took some of your advice and ended up making a short video of me routing the cables in case anyone else wonders where to route the cables.  It took longer than expected but I got it done.  Thanks for your help!

[NMKawierider]

Nice. The hose was a good idea.

[574cfmotorider]

Nice. The hose was a good idea.

Thanks!  The cable seamed a little...not so robust.  Trying to develop a youtube channel, new to the whole game, but taken queues from guys like you who know what you're doing!!  Happy Labor Day!