0 Members and 1 Guest are viewing this topic.

*

Offline NMKawierider

Has Anyone done a CVT exhaust temp gauge?
« on: November 11, 2016, 07:12:18 PM »
While I had mine apart I thought it might be a good time to install a temp gauge on the CVT exhaust but all I can find that looks like it will hold up to all the harsh conditions are those for liquid temperatures like coolant and oil. Actual air temp systems are high-dollar and that's just not going to happen. I'm not sure these sensors for fluid/liquids are sensitive enough to get a good reading on air passing by. Anyone have any inputs on this?

Ones like this are tough enough and water proof but I just don't know if it would work well enough with air:

https://www.amazon.com/MATCC-100-250-Degree-Temperature-Backlight/dp/B01EV9RAPS/ref=sr_1_2?ie=UTF8&qid=1478912460&sr=8-2&keywords=automotive+temperature+gauge

One like this will work but it's not water tight and just not built for this type of usage:

https://www.amazon.com/Beuler%E2%93%A1-Digital-temperature-remote-sensor/dp/B002B0KVFQ/ref=sr_1_7?ie=UTF8&qid=1478912794&sr=8-7&keywords=Digital+automotive+temperature+gauge

Any input is welcomed.

« Last Edit: November 11, 2016, 07:14:21 PM by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline gfmoto

Re: Has Anyone done a CVT exhaust temp gauge?
« Reply #1 on: November 12, 2016, 07:33:06 AM »
May try this place, I think they may have one you're looking for.
http://www.cyberdynegauges.net/contact_us.php
2015 ZForce 800EX
32" light bar
2-4" spots
Custom Cv guards
DIY 1/2 windshield
UNI air filter
DIY rear window
BOSS ATV 28. 450W speakers
Alpena Rock Lights (tough pods)
2" RZR Bracket lift
Roof extensions
27" Maxxis Corranado Tires
Alpena RGB rock lights
SuperATV Rocksliders
1/2 Doors w/custom paint and graphics


*

Offline NMKawierider

Re: Has Anyone done a CVT exhaust temp gauge?
« Reply #3 on: November 12, 2016, 08:53:02 AM »
Thanks GF.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

Re: Has Anyone done a CVT exhaust temp gauge?
« Reply #4 on: November 12, 2016, 04:06:14 PM »
You could also try this link I posted here a while back.

http://cfmoto-forum.com/pacific-eagle-utv/save-your-cvt-belt/
Pacific Eagle UTV Enclosures were the first manufacture to support CF Moto with aftermarket Cab Enclosures and Windshields. Today we manufacture 32 Cab Enclosure combos for the UForce 500, 800 &1000. We also manufacture 28 Cab combos for the ZForce 500, 600, 800 & 1000. We think we have pretty much got CF Moto covered.