0 Members and 1 Guest are viewing this topic.

*

Offline thewind60

front differential
« on: January 02, 2017, 01:14:59 AM »
hello all
i have a problem, when i am disengaging the 4X4 the right front wheel is not diss-engaged and making noise... what could be the problem?
are this units can be rebuild ?
is someone had this issue in the past?
Thx!!

*

Offline NMKawierider

Re: front differential
« Reply #1 on: January 02, 2017, 10:06:00 AM »
The actuator couples or uncouples the pinion from the driveline..basically. There is a small part that tends to break if this is done while under load. Its easy to fix and cheap but you will have to remove the actuator. Maybe others that have had this happen will chime-in.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline thewind60

Re: front differential
« Reply #2 on: January 02, 2017, 01:52:29 PM »
hi
thx for answering!
can you please somehow be more specific for the part that usually brake? i just dont know which one from the diff assembly diagram...
Thx!!

*

Offline NMKawierider

Re: front differential
« Reply #3 on: January 02, 2017, 02:02:56 PM »
hi
thx for answering!
can you please somehow be more specific for the part that usually brake? i just dont know which one from the diff assembly diagram...
Thx!!

You will have to take it apart to see and confirm.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Cosmosdan

Re: front differential
« Reply #4 on: January 02, 2017, 08:06:34 PM »
There is a plastic box on the front diff. Take that off and you will see a gear on it. that gear moves a plastic lever that moves the in and out. You will see it right away once you have it apart.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet