0 Members and 1 Guest are viewing this topic.

*

Offline rautry72

CFMoto brand air filter
« on: September 22, 2016, 10:36:10 AM »
Has anyone used the new CF Moto branded air filter.   Just curious as to what your thoughts about it are so far. 

Re: CFMoto brand air filter
« Reply #1 on: September 22, 2016, 08:48:00 PM »
If that's the stock filter, get something else. They've been known to fail, causing engine failure.
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come

*

Offline NMKawierider

Re: CFMoto brand air filter
« Reply #2 on: September 22, 2016, 09:13:23 PM »
Has anyone used the new CF Moto branded air filter.   Just curious as to what your thoughts about it are so far. 
If the new foam filter is a dual-stage and has the correct PPI..ie 40 first, then 60 second, then it will equal the Unifilter when treated with a quality foam filter oil. I use TwinAir and UniFilter so I have not bought one of them.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Struens

Re: CFMoto brand air filter
« Reply #3 on: September 22, 2016, 10:06:38 PM »
I have seen them at my dealer.  They look well put together.  They are pretty expensive though.  I think he quoted me around 30.00.
2016 CFMOTO Z8
Uni air filter

*

Offline Bish

Re: CFMoto brand air filter
« Reply #4 on: September 23, 2016, 05:42:56 AM »
I am using one on my Zforce. I agree, it is well put together. I ran it for approx 300 km in very dusty trail conditions. The first stage filter was coated pretty good with dirt particles ( I have no pre-filter on the intake, change is coming). The second stage inside filter was clean looking. Therefore was pretty happy with its performance.

*

Offline NMKawierider

Re: CFMoto brand air filter
« Reply #5 on: September 23, 2016, 08:34:56 AM »
I have seen them at my dealer.  They look well put together.  They are pretty expensive though.  I think he quoted me around 30.00.
That's a little more then a Unifilter but remember, they are re-useable..for many dozens of cleanings.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline willpower719

Re: CFMoto brand air filter
« Reply #6 on: September 25, 2016, 11:02:32 AM »
I have one coming from Chris in Canada. $50ish with freight. Looks like the K&N only oiled foam(blue). I will keep the Forum posted once installed. I have a twin air right now. Kinda bothered by the uncaged foam. The blue CFM unit is caged and supported.
Willpower719
2016 Zforce 800 EX
Super ATV Flip Out Windshield
Pro Armor Sound Bar
S/A Four Point Harness
Scap Doors(Crap, but FREE)
Two Brothers Exhaust
S/A Rock Sliders
Dobeck Fuel Controller
Smithfield 3" Lift Kit

*

Offline NMKawierider

Re: CFMoto brand air filter
« Reply #7 on: September 25, 2016, 11:13:45 AM »
I have one coming from Chris in Canada. $50ish with freight. Looks like the K&N only oiled foam(blue). I will keep the Forum posted once installed. I have a twin air right now. Kinda bothered by the uncaged foam. The blue CFM unit is caged and supported.
I was bothered by my TwinAir with no cage too so I took out a spring from another Uni I had, adjusted it to fit and installed it. It worked well but..I saw the extra weight of the spring allowed the entire foam end to flop around. Worried about the foam ripping loose from the base over time I removed the spring. Now I have a 5"x 8" long Unifilter coming that will either go into the box or replace my mushroom filter up on top. It does have a 3" flange I will need to get an adaptor for if I put it in the box but..it will fit.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline JJram82

Re: CFMoto brand air filter
« Reply #8 on: September 25, 2016, 10:07:48 PM »
Does anyone have a part number for the cfm filter and do you know if it will work on the 500 Z-Force

*

Offline willpower719

Re: CFMoto brand air filter
« Reply #9 on: September 26, 2016, 05:20:39 AM »
8703CF. Not sure about fitment other than the 800.
Willpower719
2016 Zforce 800 EX
Super ATV Flip Out Windshield
Pro Armor Sound Bar
S/A Four Point Harness
Scap Doors(Crap, but FREE)
Two Brothers Exhaust
S/A Rock Sliders
Dobeck Fuel Controller
Smithfield 3" Lift Kit

*

Offline AlbertCo zforce

Re: CFMoto brand air filter
« Reply #10 on: September 26, 2016, 05:35:20 PM »
I have one on my 500 zforce . I am happy with the way it works

*

Offline JJram82

Re: CFMoto brand air filter
« Reply #11 on: September 26, 2016, 06:49:14 PM »
Ok il have to try to find one my dealer said they haven't seen these yet