« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline JJram82

500 belt
« on: May 12, 2018, 01:17:29 PM »
I was wanting to know if anyone had a part number for the CVT belt for a z Force 500 I'm almost positive the belt is starting to slip because it chirps at low RPM going forward and feels like it's slipping when  taking off
Logged
*

Offline NMKawierider

Re: 500 belt
« Reply #1 on: May 12, 2018, 01:48:00 PM »
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline JJram82

Re: 500 belt
« Reply #2 on: May 12, 2018, 02:32:11 PM »
Ok thanks and how do u remove the old belt is this the same procedure as a canam belt change where u thread a bolt into the clutch?
Logged
*

Offline NMKawierider

Re: 500 belt
« Reply #3 on: May 12, 2018, 06:17:49 PM »
Quote from: JJram82 on May 12, 2018, 02:32:11 PM
Ok thanks and how do u remove the old belt is this the same procedure as a canam belt change where u thread a bolt into the clutch?
The 800s do have that ability but the way the housing is, you...at least I do.. still have to pull the secondary to get the belt off. I don't know how the 500s are...just have to try it and see.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline JJram82

Re: 500 belt
« Reply #4 on: May 12, 2018, 08:25:21 PM »
Ok so what are the odds of the chirping being the belt
Logged
*

Offline NMKawierider

Re: 500 belt
« Reply #5 on: May 12, 2018, 08:52:19 PM »
Quote from: JJram82 on May 12, 2018, 08:25:21 PM
Ok so what are the odds of the chirping being the belt
I'd say pretty good. Pull it and see is the only way to know. A slipping belt is also hard on the clutch sheave it's slipping on so...the sooner the better.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Cosmosdan

Re: 500 belt
« Reply #6 on: May 12, 2018, 10:16:26 PM »
A long 6mm bolt will open up the secondary. I'm not sure about the trailbloc primary you have. Should be some info out there on it.
Logged
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet
*

Offline ctdls

Re: 500 belt
« Reply #7 on: May 13, 2018, 09:58:59 AM »
I just checked the Cdn website, you guys are getting "hosed"  ;D

CFM-0180
DRIVE BELT FOR 500/600EFI
MSRP: 129.95$
Logged
ZF 800 LX Trail, stock for now.......not for long.
*

Offline JJram82

Re: 500 belt
« Reply #8 on: May 15, 2018, 06:50:01 PM »
So I just got the CVT cover off and it seems like there's a lot of metallic material inside the clutch when I turn it and very loose any ideas
Logged
*

Offline JJram82

Re: 500 belt
« Reply #9 on: May 15, 2018, 06:56:30 PM »
The material  looks like clutch dust
Logged
*

Offline NMKawierider

Re: 500 belt
« Reply #10 on: May 17, 2018, 04:17:31 PM »
Post some pics. Clutch dust is generally just belt wearings along with the dust that gets pumped through a CVT...not usually any metallic quality to it unless something is wearing...
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline JJram82

Re: 500 belt
« Reply #11 on: May 22, 2018, 09:04:50 PM »
Well for some reason I can't get pictures to upload but here's the update I took the Z-Force to dealer and they called me this morning and said the clutch is bad so they're supposed to be a bolt that holds the entire clutch assembly together and somehow it is gone and the clutch is junk luckily Rider's Advantage warranty is covering a new clutch
Logged
Pages: [1]   Go Up
« previous next »