0 Members and 1 Guest are viewing this topic.

*

Offline theheavys

2018 cforce 800
« on: September 12, 2022, 06:58:51 AM »
hi there so my 2018 cforce has no injector pulse does anyone know why this would happen,i did put a new ecu,all relays,fuel pump,battery still no stat injectors wont spray fuel oh i just replaced the injectors as well one side of the injectors have steady power as well

*

Offline NMKawierider

Re: 2018 cforce 800
« Reply #1 on: September 12, 2022, 10:30:12 AM »
Crank position sensor..aka engine speed sensor has an issue.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline doug80638

Re: 2018 cforce 800
« Reply #2 on: September 12, 2022, 11:19:57 AM »

X2.  No crank signal means no injector pulses.

Guessing can get expensive ....
2017 Zforce 800 - Red
SuperATV Flip windshield
Tusk soft rear window
Uni-Filter foam air filter
Bandit springs

*

Offline NMKawierider

Re: 2018 cforce 800
« Reply #3 on: September 12, 2022, 01:06:16 PM »
Sensor's pretty cheap...about 47 bucks..but sometimes its not the sensor, but something has got tossed-up between the rotor and the sensor's tip. Just pull it and see.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube