[tp2020]

Hi,

I have a 2014-cf800-3 4x4 tracker. flashing codes /no start. the flashes are all the same speed
and the count is 10 pause 3 pause 3 pause 7. anyone around that can help me with this much appreciated.

[doug80638]

Crankshaft position sensor - No Signal

Check for a loose or dirty connector(s) first.

Check the resistance and continuity of the sensor.

Then test for voltage from sensor while cranking the engine.

If any of the tests fail, replace it.

If the sensor is good, check the harness for voltage to the sensor and a good ground.

[tp2020]

Thanks for the quick reply! much appreciated.