« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline Chowder1232

Upgraded shocks
« on: January 29, 2018, 02:12:26 PM »
I'm attempting to put some after market shocks onto my CFORCE 800 I know the original shocks are very good however I want to upgrade to something more well known. I had some interest in the fox 1.5 podiums rc2 but am not seeing anything compatibility wise, are ATV shocks pretty universal? Or will I need to do some more heavy searching for shocks that are able to be compatible. hope to hear back from anyone willing to help out thank you.
Logged
2018 CFORCE 800 with 1.5'' spacers on all four wheels, 32inch curved light bar under front rack wired to high beams. Winch wired to wireless remote as well as to front plug in with adapter. Heat Demon Heated Grips plus thumb warmer.
*

Offline NMKawierider

Re: Upgraded shocks
« Reply #1 on: January 29, 2018, 02:20:12 PM »
My best suggestion is to get some data then call FOX to see what will fit. Get the "I" to "I" length front and back measurement as well as the spring diameter, the mount width and the bolt shaft size. Then get the overall machine weight and any additional weight you usually take. 

This is what I intend to do with Elka on my Z8.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Chowder1232

Re: Upgraded shocks
« Reply #2 on: January 29, 2018, 02:27:59 PM »
Quote from: NMKawierider on January 29, 2018, 02:20:12 PM
My best suggestion is to get some data then call FOX to see what will fit. Get the "I" to "I" length front and back measurement as well as the spring diameter, the mount width and the bolt shaft size. Then get the overall machine weight and any additional weight you usually take. 

This is what I intend to do with Elka on my Z8.

awesome will do, do you know whether or not the front and the rear are the same or will I need to measure both front and back?
Logged
2018 CFORCE 800 with 1.5'' spacers on all four wheels, 32inch curved light bar under front rack wired to high beams. Winch wired to wireless remote as well as to front plug in with adapter. Heat Demon Heated Grips plus thumb warmer.
*

Offline NMKawierider

Re: Upgraded shocks
« Reply #3 on: January 29, 2018, 05:13:20 PM »
Quote from: Chowder1232 on January 29, 2018, 02:27:59 PM
Quote from: NMKawierider on January 29, 2018, 02:20:12 PM
My best suggestion is to get some data then call FOX to see what will fit. Get the "I" to "I" length front and back measurement as well as the spring diameter, the mount width and the bolt shaft size. Then get the overall machine weight and any additional weight you usually take. 

This is what I intend to do with Elka on my Z8.

awesome will do, do you know whether or not the front and the rear are the same or will I need to measure both front and back?
The fronts and rears are usually a little different. Just jack it up so the shocks are fully extended and take your measurements. No need to remove them. Might have to take a nut off to get the bolt size though. Just one though.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Wheels

Re: Upgraded shocks
« Reply #4 on: January 29, 2018, 07:41:21 PM »
Cforce 800
I to I front =373mm
I to I rear = 375mm
Olhins has a beautiful set built for the cforce 800.
Logged
If it has Pistons or Tits you will encounter problems.
Pages: [1]   Go Up
« previous next »