« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline vettex1

Hard Shifting
« on: October 21, 2024, 03:06:24 PM »
I just picked up 2021 800 XC with 77-Miles on it the other day and noticed that from time to time I'm unable to shift it.  It seems to happen more often when I'm in reverse and trying to shift after backing up.  I am stepping on the foot brake that doesn't change anything.
Logged
*

Offline NMKawierider

Re: Hard Shifting
« Reply #1 on: October 21, 2024, 04:08:21 PM »
If it shifts after you shut it off then it's likely the idler bearing that the belt rides on at idle is starting to seize. When this happens it tries to rotate the belt applying pressure on the secondary and thus the transmission...and that makes it hard to slide gears around. I very common problem. If so, just replace it.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline solomon

Re: Hard Shifting
« Reply #2 on: October 21, 2024, 04:12:36 PM »
Mine does the same thing but only when it's cold, meaning I let the machine warm up for a bit then it works fine. Or like NMK said it could be the one way....
sol...
Logged
2022 cforce 800xc, RNG Stage one kit, Uni filter with cover, Auxbeam led, Nilight Rock Lights Tesseract rear box, Whiskey bent exhaust tip, heat wrapped header. Rival front bumper, Kenda BearClaw Tires 26x9x14(f) 26x11x14(r)
*

Offline Lazydayz

Re: Hard Shifting
« Reply #3 on: October 22, 2024, 04:23:53 PM »
Other then the above mentioned

Do you let it idle down before shifting

I have a new belt on my uf1000 an if it ain’t idled right down till the belt wears in its shit to shift

Also can you adjust the linkage always an issue in the first few hundred miles
Logged
21 uforce 1000
SA doors
30” dirt commander 2.0 on itp deltas
Custom cab and box cover
Custom clutching
*

Offline vettex1

Re: Hard Shifting
« Reply #4 on: November 19, 2024, 10:46:07 AM »
It does it hot or cold.  I am letting it idle down prior to shifting or attempting to shift.  It's not all the time, but it's 90% of the time, it's only when trying to shift out of reverse.  Turning it off doesn't help at all, rocking the machine seems to help slightly.  I'll try the idler bearing and see if that helps.
Logged
*

Offline Mogleybear

Re: Hard Shifting
« Reply #5 on: November 20, 2024, 04:30:02 PM »
I've had to rock my 800 XC occasionally to be able to shift easily since it was new. 
Logged
2019 Cforce 800XC
Pages: [1]   Go Up
« previous next »