Day Light Relay

Started by jason14905, August 17, 2020, 07:03:41 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

jason14905

Guest
Logged
jason14905
Guest
So I have a question don't know if someone could answer this but. My daytime running lamps would always be on even if I put the switch to the off position. I removed the daylight relay fuse and now the daytime running lamps works the way they should I can turn them off and on. So why don't they work with the relay fuse installed. This is a 2019 CForce 800 XC.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Probably a safety-thing. If we had the service manual with the wiring diagram we could see for sure.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

jason14905

Guest
Logged
jason14905
Guest
Well I took the relay fuse out and left it out. Everything works like it should now.

Postipena

Guest
Logged
Postipena
Guest
Hello! New user on this forum.

The drl relay switches on the halos around your low beam projector and the parking lights, or side lights, via diode. So when you take the drl relay out, your halos will never light up, but your side lights work normally by the light switch.

jason14905

Guest
Logged
jason14905
Guest
That fine with me I don't ride at night time much anyways. But I do have a question tho you sound like you know what you are talking about. More than a Dealership does. My 15 amp Control Fuse blows when I've done about 35 miles. The Machine just shuts down then once it cools down I put a new one in and then it's fine. Some people say that there is a wire rubbing. I don't believe that because if it was it would be doing it all the time.  There is another that has the same Machine and his just started doing the same thing.

Postipena

Guest
Logged
Postipena
Guest
That's a tricky one, cos there is quite a bit of stuff behind that fuse. To me it sounds like rubbing wire also. For sure I can tell it's not the cooling fan, fuel pump, drl or the output sockets because those have their own fuses. I'd check the trailer socket and all the moving wires like on the handlebar. There's nothing I can see that would relate to driving 35miles and turning on then. Many engine components take power behind the main fuse like injectors, coils and o2's, so none of them can be the culprit.
Front diff motor is having power from that fuse. Could it have something to do with it?

600T21

**
Junior Member
Posts: 1
Logged
600T21
Junior MemberPosts: 1
Hi. How do you know which one is the fuse and relay for the DRLs? I have a 21 cforce 600 and the manual does not identify which one is which.