I have a 2021 cforce 500 and I like the zforce shocks and I wanna upgrade to a resivor type shock or a adjustable coil over, so my question is will any zforce shocks fit my cforce 500? Thanks

[2015 Z Force 800 53/Trail EPS]

I have a 2021 cforce 500 and I like the zforce shocks and I wanna upgrade to a resivor type shock or a adjustable coil over, so my question is will any zforce shocks fit my cforce 500? Thanks

I believe they are too long.

Do u have any shocks you would recommend? I want to get a little stiffer of a ride and I bottom out alot. What's the length I need to order new shock I see the numbers but idk what my shock length is or size  holes for mounting If anyone knows please let me know thanks much appreciated.

[2015 Z Force 800 53/Trail EPS]

Do u have any shocks you would recommend? I want to get a little stiffer of a ride and I bottom out alot. What's the length I need to order new shock I see the numbers but idk what my shock length is or size  holes for mounting If anyone knows please let me know thanks much appreciated.

Jack the front...then the back up enough to get the wheel off the ground. Then measure from the center of each bolt on either end. Then contact Bandit or Elka Suspension. Have the weight specs available..ie the machine itself and all it has to carry.

The old 800 has the same lenght shock and with some preeload adjusting the work on other machines as well as the have the same cc measuremants.

I have those shocks on my 520 (500s in the US) and I had to grind out some metall on the rear upper shock mount to make them fit.

The old 800 has the same lenght shock and with some preeload adjusting the work on other machines as well as the have the same cc measuremants.

I have those shocks on my 520 (500s in the US) and I had to grind out some metall on the rear upper shock mount to make them fit.

Hello!

Thats good to know because I am looking also some better shocks for my 2020 cf520.

Can you tell what year cf800 shocks are compatible to cf520 and how much ride difference did you notice? And are both front and rear shocks compatible to cf520?

Also can you make some pictures of your machine on how you mounted and where did you grind the metal? It will be lot of help if you can post pictures also.

Best regards,
...