2013 Cforce 500 Indicator light constant flash

Started by Barrycuda, March 02, 2024, 07:53:06 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

Barrycuda

**
Junior Member
Posts: 1
Logged
Barrycuda
Junior MemberPosts: 1
Atv had been running poorly for a long time running very rich black smoke out of exhaust, hard to start spark plug fouling all the time.  Long story short I found that the dealer did not hook up the hose to the temperature pressure sensor when they had it in for some other service. After I hooked up the hose it runs great.. However now the indicator light is constantly flashing, no pattern no break it just flashes.  When you first start it thr indicator is not on, it starts flashing after 5min or so.  I replaced the spark plug, O2 sensor, Temperature pressure sensor and the injector (it was leaking).  Like I said it runs great just that stupid light.  Might just put tape over it and call it good

murdo

*****
Guru
Posts: 446
Logged

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
It's trying to tell you there is an error somewhere. You apparently will need a code reader to find it. Might be worth a trip to the dealership.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube