Hello, thanks for the vídeo, we can´t get much info of the vídeo, no countable errors. The EPS indicador should stay on after ingnition and then goes off after engine start if there is no fault, your blinks on and then turns off, very stange? I would check EPS fuse, then go to the EPS ECU and check all cables and plugs and see if there are damage or ground cables. Unplug the connectors and clean them, see if you get any results. There are not many throubleshooting with the EPS, or it is a cable, motor, or EPS ECU with should be expansive. Check with a friend if they have same EPS and swap the EPS ECU and see results. If you have your dealer close its better to take it, it should be under warranty.
Hi still no joy with my eps after checking controller and doing various other tests now I uploaded a video 3 months ago showing two quick flashes of eps on LCD screen but no error code but today I recorded another video this time it seems like an error code for my eps can someone have a look at my video and see if they know what it means cheers post link bellow