« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline Gregor

Coolant leak
« on: January 13, 2018, 03:32:49 PM »
The overflow tube behind the cover for the engine oil constantly leaks coolant out of it. The longer it runs it will start to shoot it far enough that it clears the floor board and lands on the ground. While the machine is running the temp is around 4 bars and never overheats.
Logged
2017 Cforce 500
*

Offline NMKawierider

Re: Coolant leak
« Reply #1 on: January 13, 2018, 03:45:02 PM »
Sounds like something that needs fixed...probably the mechanical seal on the water pump shaft...like so many others.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Workhardplayhard

Re: Coolant leak
« Reply #2 on: January 24, 2018, 11:43:29 AM »
That tube definitely goes to the water pump. If it's still under warranty take it to the dealership.
Logged
🇨🇱 2016 Cforce 500 HO
*

Offline Zoomzoom

Re: Coolant leak
« Reply #3 on: January 26, 2018, 07:37:19 PM »
Same thing happened to me. The seals were replaced under warranty and I haven't had a problem since
Logged
2017 zforce 800 ex
Uni filter w/ outerwears pre filter
Pro armor 4 point harness
Ooga horn / custom rock sliders
*

Offline ACIDICJO

Re: Coolant leak
« Reply #4 on: January 29, 2018, 09:30:58 PM »
Think we’ve all had the problem.  :-\
Logged
2014 ZForce 800 EX
14 in ITP Hurricane's
Sedona Mudder InLaws 30's
2 inch lift
24 inch light bar
2 cube lights
6 inch rear light bar
Wetsounds stealth 10 soundbar
BlueSea Fuseblock
2012 Polaris Rzr 800 all black
2005 Honda Rincon gone but not forgotten
*

Offline KBfun99

Re: Coolant leak
« Reply #5 on: June 30, 2018, 09:15:47 AM »
I am having this same problem along with the EFI light blinking and my machine keeps stalling out it has gotten worse and now will not start....  Am I able to change the seals on the water pump or is this a deal need to do?

Also could my EFI problem be related to this or is that a separate issue?

Thanks for any help!
Logged
Pages: [1]   Go Up
« previous next »