[Mudmonster]

hey guys  I have a 2019 cforce 500 ho eps 2 up . The rear shocks are sagging when 2 riders are on board,  shock load is at the max  . Anyone know of a heavier duty shock or spring i can switch out too that will stop the sag and lift the ass end when 2 riders are on ??  Thanks guys

[NMKawierider]

hey guys  I have a 2019 cforce 500 ho eps 2 up . The rear shocks are sagging when 2 riders are on board,  shock load is at the max  . Anyone know of a heavier duty shock or spring i can switch out too that will stop the sag and lift the ass end when 2 riders are on ??  Thanks guys

Send an email to Bandit UTV Suspension Sales. They will have you take a couple of measurements and get you set up.

[Mudmonster]

Tried that  they told me they couldn't help

[NMKawierider]

That's too bad.

[Mudmonster]

UPDATE:  tracked down some killer replacement shocks for rear:Bronco Gas Shocks AU-04404   these are a perfect fit for this model  rides great with 2 riders, plenty of ground clearance  (better than oem)along with very stable handling.   

[markermatinger]

Do you have them set to the max stiffness instead of the default "b"?

[JVMcKean]

All, I too bought the Bronco AU-04404 adjustable shocks for the rear of my 2017 500 HO EPS two up mechine. They fit perfectly both upper and lower eyes were a direct fit. They have plenty of adjustment as they came from the factory too stiff and I backed them off below the half way mark on the threaded body. They use counter tightened spanner locks to lock the shock in place. I'm 240 and wife is 133. With cooler and gear, nice ride. I do have different tires and rims, installed stock grizzly rims, tires on my rig as they are much lighter than OEM CFMoto. Just wanted to share. The modified rear shocks I made two years ago were lower in height, so the bronco's provided much needed suspension lift.