Has anyone rode the overland on the Paiute system in Utah? Does the machine meet the under 50" requirement?

[2015 Z Force 800 53/Trail EPS]

Specs show 48"s wide so..you should be good.

Did you ever end up riding the Paiute trail?
It looks like the Overland's fender flares push it over the 50 inch limit.

I'm planning on riding that trail system next month, and just wondering about your experience.

I'm planning on taking off the fender flares to get within the 50 inch limit.
Any recommendation on the plastic rivet removal / pliers?
Thanks.

[2015 Z Force 800 53/Trail EPS]

Overall these are the best push-pin pliers. There are also an angled version that works well too and Harbor Freight has these for a little less.

https://www.amazon.com/Plastic-Fastener-Remover-Retainer-Chrysler/dp/B09KH2Y436/ref=sr_1_12?crid=NAFRMZ4GPNGR&keywords=body+rivet+pliers&qid=1683048430&sprefix=body+rivit+plyers%2Caps%2C149&sr=8-12

The pinch gates around here are 50"...  My Cforce 1000 fits through just fine as it is. 

I think most pinch gates across the nation are set at 50".

Update.....
Well, I just finished a week on the Paiute trail in central Utah.
I had pulled off my fender flares just in case. There were several gates that would have accommodated the stock fender flares no problem, but others that would not have. It was better to be in compliance with the 50" regulation, than not.

One awesome trail system. We only got through about 260 miles, but highly recommended!

[2015 Z Force 800 53/Trail EPS]

Sounds like a heck-of-a-ride.

Update.....
Well, I just finished a week on the Paiute trail in central Utah.
I had pulled off my fender flares just in case. There were several gates that would have accommodated the stock fender flares no problem, but others that would not have. It was better to be in compliance with the 50" regulation, than not.

One awesome trail system. We only got through about 260 miles, but highly recommended!

Bro... .you can't just say you rode the trail and give us no eye candy....   Where are the figgin pics?

[2015 Z Force 800 53/Trail EPS]

Update.....
Well, I just finished a week on the Paiute trail in central Utah.
I had pulled off my fender flares just in case. There were several gates that would have accommodated the stock fender flares no problem, but others that would not have. It was better to be in compliance with the 50" regulation, than not.

One awesome trail system. We only got through about 260 miles, but highly recommended!

Bro... .you can't just say you rode the trail and give us no eye candy....   Where are the figgin pics?

Yeah I agree...and an epic ride like that should also have some video as well.

Here's a couple of pics that I just grabbed. Enjoy!!!

Great pics.... thank you!