[reepsracing]

what wheel spacers will fit my 2018 uforce without problems-thank-you-hoping to get 1.5in

[NMKawierider]

I think I just responded to your email. These are what I use:  https://www.ebay.com/itm/4-1-5-4x110-Wheel-Spacers-for-Yamaha-YFM-450-600-660-700-Rhino-Grizzly-ATV/151940578979?hash=item23605d3ea3%3Ag%3AeaAAAOSwFnxaXq64%3Ark%3A31%3Apf%3A0&fbclid=IwAR37p3OZ5OTd5JapHCpZneSM_w0De88gLgrQZ6yzMXo3yhsdcP3gS82nGuo

[eg78]

I think I just responded to your email. These are what I use:  https://www.ebay.com/itm/4-1-5-4x110-Wheel-Spacers-for-Yamaha-YFM-450-600-660-700-Rhino-Grizzly-ATV/151940578979?hash=item23605d3ea3%3Ag%3AeaAAAOSwFnxaXq64%3Ark%3A31%3Apf%3A0&fbclid=IwAR37p3OZ5OTd5JapHCpZneSM_w0De88gLgrQZ6yzMXo3yhsdcP3gS82nGuo

Will these work on my cforce800? would there be any negative impact to installing spacers like ride quality or risk of breaking something?

[Skogsvarelse]

If you put to "wide" spacers on the whell bearings can wear faster because the force of the wheel further out. Do you plan to put aftermarket rims on aswell or youst spacers? Most aftermarket rims have a different ofset that "space" out the wheel.

If the spacers are bolt pattern 4x110 it will fitt.

Spacers can improve stability because you get a wider base and it takes more angle or force to tip it over.

Ypu meight feel some more kickback in the steering wheel (if you have eps it shoul almoust be un noticeble)

[NMKawierider]

Those will work fine.

[shanewoodsman]

I want to put some spacers on this ATV but every company that sells spacers looks up CFMOTO and doesn't see this model listed - can someone tell me what I need (the dimensions)?  I just want to go a little wider, and go from 25 inch tires to 26 inch tires - advice is cool!

[NMKawierider]

I want to put some spacers on this ATV but every company that sells spacers looks up CFMOTO and doesn't see this model listed - can someone tell me what I need (the dimensions)?  I just want to go a little wider, and go from 25 inch tires to 26 inch tires - advice is cool!

If you decide to keep it Shane, then stay with 1.5 or 1" spacers and all CFMs use a 4-110 bolt pattern and all use the lug-centric for centering meaning they use the tapered lugs like a car.  Get two sets of these:  https://www.ebay.com/itm/2pc-1-5-4-110-Wheel-Spacers-fits-Arctic-Cat-250-DVX240-DVX400-2WD-4WD-Race-ATV/264162010152?hash=item3d81486428:g:0-cAAOSwRbpcShoO:sc:USPSPriorityFlatRateBox!87109!US!-1

[Scoopien]

Hi NMKawierider,

Sorry to bring up this post but I have a doubt about spacers sold here in Europe (all this would have been easier if I were on your side lol) I have a lot of choice in spacers but I really do not see the differences between each, for example on these 2 links I have a pack of 4 spacers at 125 € and on the other link I have a pack of 2 spacers at 207 €, it is a big difference in price, do you know if it is better to use one or the other? For me they are identical

I saw that one uses extension and the other does not. Maybe this is the difference and the one without extension is more resistant than the other?

Links:
https://www.tonnycat.com/elargisseurs-de-voie-quad/elargisseur-voie-35mm-maverick-1000-xrsxxcturbotrail-xrw-trcdp,122416.html

https://www.tonnycat.com/pack-d-elargisseurs-de-voie-quad/kit-4-elargisseurs-identiques-35mm-xrw-entraxe-4x110-115-xrw-trcdp,45932.html

Thanks

[Scoopien]

another one : https://www.ezyquad.com/elargisseurs/10192-elargisseurs-de-voie-4x110-45mm-art.html

[NMKawierider]

another one : https://www.ezyquad.com/elargisseurs/10192-elargisseurs-de-voie-4x110-45mm-art.html

The thing is, any that uses one set of studs to mount the adaptor to the hub and another to the when must at least use tapered lugs to center the adaptor on to the hub as all CFMs are lug-centric meaning they use the lugs to center anything to the hub. Without being centered the wheel also won't be centered and you can imagine what that means on the road as I know you guys do a lot of. So..the two examples if those that you had links to showed flat stud holes not holes with tapered ends. That worries me. The other one uses an extended stud that centers the spacer over a shoulder and you would use your original tapered lug nut . I like the design of the others better but I would have to go with the ones with the extend stud only because of that reason. Extending studs is never the best idea but unless you can ensure all aspects of the other spacers are for tapered lugs, then I think you have to go with them. It's too bad you can't just get a set of these:

https://www.ebay.com/itm/4X-1-5-ATV-4X110-10x1-25-Wheel-Spacers-For-Honda-Kawasaki-Suzuki-Yamaha/272516506666?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20190212102350%26meid%3D5b4e045b1487430e86c5c1def127feef%26pid%3D100012%26rk%3D1%26rkt%3D12%26mehot%3Dpp%26sd%3D331286909115%26itm%3D272516506666%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWeb&_trksid=p2047675.c100012.m1985

[Scoopien]

another one : https://www.ezyquad.com/elargisseurs/10192-elargisseurs-de-voie-4x110-45mm-art.html

The thing is, any that uses one set of studs to mount the adaptor to the hub and another to the when must at least use tapered lugs to center the adaptor on to the hub as all CFMs are lug-centric meaning they use the lugs to center anything to the hub. Without being centered the wheel also won't be centered and you can imagine what that means on the road as I know you guys do a lot of. So..the two examples if those that you had links to showed flat stud holes not holes with tapered ends. That worries me. The other one uses an extended stud that centers the spacer over a shoulder and you would use your original tapered lug nut . I like the design of the others better but I would have to go with the ones with the extend stud only because of that reason. Extending studs is never the best idea but unless you can ensure all aspects of the other spacers are for tapered lugs, then I think you have to go with them. It's too bad you can't just get a set of these:

https://www.ebay.com/itm/4X-1-5-ATV-4X110-10x1-25-Wheel-Spacers-For-Honda-Kawasaki-Suzuki-Yamaha/272516506666?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20190212102350%26meid%3D5b4e045b1487430e86c5c1def127feef%26pid%3D100012%26rk%3D1%26rkt%3D12%26mehot%3Dpp%26sd%3D331286909115%26itm%3D272516506666%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWeb&_trksid=p2047675.c100012.m1985

Thank you for your response and I understood correctly, I will see if I find like the one you are showing me, if I bought it from your link I have it for $ 200 shipping ...