CFMoto-Forum

ZForce => ZForce 800 EX, 53 & Trail => Topic started by: smitty421 on July 18, 2015, 10:28:16 PM

Title: zforce 800ex tuner wiring
Post by: smitty421 on July 18, 2015, 10:28:16 PM

Iv got a 2014 zforce 800ex and got a magnum tuner for it but the diagram and instructions ain't clear. Does anyone know which wires are the signal wires on the o2 and iat sensors? 

Title: Re: zforce 800ex tuner wiring
Post by: Cosmosdan on July 18, 2015, 11:13:32 PM

Service manuals are out there. I do have one for the z6. I tried to upload it but no joy. For the z6 it is O2 ecu pin 24 O/W wire. For IAT it is pin 6 Y/GR. Hard to see second color but yellow for sure. Let us know how the tuner works out. I did look into one of these but seen it as a gamble. When I changed my plug, it showed I am running a bit lean.

Title: Re: zforce 800ex tuner wiring
Post by: Spaceman78 on September 16, 2015, 08:09:56 PM

I was thinking about getting on of these because they're cheaper and some don't require programing or adjusting. Did you get yours hooked up? How well does it work?

Title: Re: zforce 800ex tuner wiring
Post by: smitty421 on September 17, 2015, 02:28:12 AM

I never could get it figured out spent all kinds of time researching and emailing the company but no one could answer my ?  Ended up going with the ejk and  glade I did its worth the fifty extra bucks

Title: Re: zforce 800ex tuner wiring
Post by: Spaceman78 on September 17, 2015, 08:41:55 PM

OK. Thanks.