I am looking for some wheel spacers for my new ZForce 800 trail. Thinking about using the 1.5 ones. There seems to be a big difference in prices and just wondering where anyone who bought them could tell me where they got theirs. E Bay looks like they have a big assortment. Thanks

[2015 Z Force 800 53/Trail EPS]

I used these..or ones like these. Remember to torque to about 58ftlbs then again after the first ride. Aluminum cold flows a little at first then stops.

https://www.ebay.com/itm/4X-1-5-ATV-4X110-10x1-25-Wheel-Spacers-For-Honda-Kawasaki-Suzuki-Yamaha/272516506666?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3D811291e5d94b45829290bbf893c3e10b%26pid%3D101195%26rk%3D1%26rkt%3D12%26mehot%3Dag%26sd%3D312524240258%26itm%3D272516506666%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv9PairwiseUnbiasedWeb%26brand%3DECCPP&_trksid=p2047675.c101195.m1851

Thank you for the link on Ebay  The seller says the studs maybe to long to enable the lug nuts to fully tighten down on the wheel. Any problems like this?

[2015 Z Force 800 53/Trail EPS]

Thank you for the link on Ebay  The seller says the studs maybe to long to enable the lug nuts to fully tighten down on the wheel. Any problems like this?

I did not..but maybe you will want to message the seller to get an exact length of the stud. CFMoto saves on materials by making things like their rims thinner which allows them to use shorter studs..around 5mm. That difference conflicts with the industry standards sometimes. I discovered this when a swapped tires and wheel with my Brute Force yo see how I liked the Reapers on the Moto. All the lug nuts were close-ended and with the Z's wheels on the Brute I could not tighten then down without bottoming out first. Had to use the old stock open lug. But with the Brute  wheels on the Moto, there was about 5mms less stud sticking out. This was without the spacers on the OE hub. Still, I am using the OE lug nuts on the spacers with the standard length stud so...maybe I'm just lucky. I do know some have had some issues with stud length but usually it ended up being that got the wrong spacer in the first place...ie hub-centric instead of lug-centric...ect.