I am having trouble adding turn signals to my zforce 800. I bought link cables,flasher, and turn signals switch.The problem is that the link cables wont fit to the grey connector. I think i bought the wrong ones. For the front turn signals can I use any lights or do they have to be from the dealer because I bought some led strips that are supposed to be used for turn signals.

I think wheels posted about these a while back. Might look through his posts.

Mine didn't match up either. I ended up cutting both connectors off, and wiring them together direct. Works great. I used solderless terminals and a little silicone for weather proofing.

[2015 Z Force 800 53/Trail EPS]

I think wheels posted about these a while back. Might look through his posts.

Yeah seems like I remember something about some changes in the harness connections.

Find weatherpack terminals and use them. They have a rubber seal and lock in tight. Same type you will find in cars. You can find them in any pin count you need. Need to know the approximate wire gage before ordering.

MUYI 10 Kit 3 Pin Way Waterproof Electrical Connector Green Seal Red Insert 1.5mm Series Terminals Heat Shrink Quick Locking Wire Harness Sockets https://www.amazon.com/dp/B01FP1HXIU/ref=cm_sw_r_cp_apa_MuxIybMN8JDR3

when I was ordering them from alpha sports I saw two different types of link connectors they had different parts number and one was more expensive .I think that could have been the right connector but ill try those on amazon instead. And for the rear  turn signal lights do I have to replace the tail lights or can I add extra lights

I says those connectors arent avaliable

it*

Just look for weatherpack. You will find all sorts of options.