0 Members and 1 Guest are viewing this topic.

*

Offline dmelfi

Roll Cage
« on: January 30, 2016, 09:50:02 AM »
How easy is it to remove and re-install the roll cage?  Looking at a hybrid trailer that has a 5'6" entry and the CFMoto height is 6' as per specs.

Thanks.

*

Offline NMKawierider

Re: Roll Cage
« Reply #1 on: January 30, 2016, 10:07:18 AM »
Not terrible. Probably 15 minutes to remove and another to reinstall. All four bolts at the mirrors, all four at the bed, then all four on the upper shoulder bars.
Check the height to the top of the roll bar. The roof adds quite a bit and maybe you can just take it off instead.
« Last Edit: January 30, 2016, 12:19:21 PM by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline dmelfi

Re: Roll Cage
« Reply #2 on: January 30, 2016, 10:21:34 AM »
I need about 8" to clear the opening.  In storage now so can't check it.  Want to get something for my sleds and would like to be able to fit the Snyper if necessary.

Thanks for your response.