Does anybody have an aftermarket part number for a front wheel bearing?  After reading the thread about the rear wheel bearing I figure if we put our collective heads together we can find an aftermarket front.  I'll start with the CF-Moto part number: 30499-03080  Bearing, Hub.

Quick Google search revealed:

This bearing is also know as:
Arctic Cat: 1402-027
Peer: FWD305532
Yamaha: 93305-00602-00
Industry Number: DAC3055W
Industry Number: DAC30550032

Fits Arctic Cat:
250 4x4, Front, (2 Req) (05)
300 4x4, Front, (2 Req) (05)
400 4x4 - FIS Automatic, Front, (2 Req) (05-08)
400 4x4 - FIS Manual, Front, (2 Req) (05-08)
400 4x4 - TBX Automatic, Front, (2 Req) (05 & 06)
400 4x4 VP Manual, Front, (2 Req) (06)
500 4x4 Automatic, Front, (2 Req) (05-08)
500 4x4 TBX Automatic, Front, (2 Req) (05 & 06)
500 4x4 TRV Automatic, Front, (2 Req) (05)
500 TRV, Front, (2 Req) (08)
500CC - FIS Manual, Front, (2 Req) (05-07)
650 4x4 H-1 Automatic, Front, (2 Req) (05-08)
650 4x4 V-2 Automatic, Front, (2 Req) (05 & 06)
650 Prowler XT H1, Front, (2 Req) (06-08)
700 Diesel, Front, (2 Req) (08)
700 EFI 4x4, Front, (2 Req) (07 & 08)
700 Prowler XTX H1, Front, (2 Req) (08)
Thundercat, Front, (2 Req) (08)

Kawasaki:
Teryx 750, Front, (2 Req) (08 & 09)

Yamaha:
YFM550 Grizzly 4x4, Front, (2 Req) (09)
YFM660F Grizzly, Front, (2 Req) (03-08)
YFM700F Grizzly, Front, (2 Req) (07-09)


The DAC3055W 30mm ball bearing that is found in many applications. This 30mm ball bearing is high quality and can take electric motor demands if needed. The DAC3055W is designed mostly for ATV bearing applications. It also can be found in dirt bike and motorcycle applications. This bearing is also know as DAC30550032.



I may have answered my own question.

[2015 Z Force 800 53/Trail EPS]

LOL..I think you have. Nice work.

Anyone confirm the above mentioned model's that supposedly use same bearing ? Or are we limited to oem bearings only?  I just replaced my rear at 50 a piece from my dealer so looking for cheaper ones for future.

https://www.thebigbearingstore.com/dac3055w-atv-double-radial-ball-bearing-30x55x32/
I do believe these are the ones for the front. I accidentally ordered them for the rear but they were too small. I didn't try to put them on the front as mine bearings are good in the front but these should be fronts.

Anyone confirm the above mentioned model's that supposedly use same bearing ? Or are we limited to oem bearings only?  I just replaced my rear at 50 a piece from my dealer so looking for cheaper ones for future.

what dealer are you using?
I got mine from the dealer at $36

I can confirm that a:

DAC3055W Rubber Sealed Deep Groove Ball Bearing - 30x55x32 mm

will fit the front.  Just make sure that it is sealed on both sides.  I paid 15.50 with free shipping off of ebay.  Timken also makes this size bearing.  Its hard to say if a Timken will hold up better that the Chinesium bearing.  You can buy 3 for the price of one Timken.

When installing freeze the bearing for a day, and heat the knuckle with propane.  The bearing should drop in without any trouble.  Here's a video for your entertainment.

Nice.  Done that many times on pinon bearing race . Lov the fact that the DAC3055W  bearing work for front also
great post, thanks

Just to be clear, this bearing is for the front only. It will not fit the back.

In a post somewhere, but here is the rear bearing.

Precision 513022 Wheel Bearing https://www.amazon.com/dp/B005G0WMRS/ref=cm_sw_r_cp_apa_MM0mAbXE6XB9D

Just to be clear, this bearing is for the front only. It will not fit the back.

Aw ,,Ok i see my error .. front only but is still great info for me.
thanks

Anyone confirm the above mentioned model's that supposedly use same bearing ? Or are we limited to oem bearings only?  I just replaced my rear at 50 a piece from my dealer so looking for cheaper ones for future.

what dealer are you using?
I got mine from the dealer at $36

Sorry just seen this. I rarely get on the forum. I started and manage the PA Cfmoto page on Facebook. 
My dealer is Buttorffs in Central PA.  50 min east of state college.  I bought bearing from him , took the hub off and left him press it in , FREE which is easy job with press.