« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline davidpaul

Non powered steering rack
« on: October 13, 2016, 05:52:46 AM »
Is the bush/spacer on the drivers side of the rack supposed to be free floating http://i1218.photobucket.com/albums/dd419/davidpaul1/pppppppppppp.jpg
Logged
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
*

Offline NMKawierider

Re: Non powered steering rack
« Reply #1 on: October 13, 2016, 07:37:45 AM »
Gust a guess..but I wouldn't think so. That leaves it open for anything to get in side.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline chuddly

Re: Non powered steering rack
« Reply #2 on: October 14, 2016, 08:19:01 AM »
I assume you have the boot that goes over that??  That bushing/spacer acts both as a scraper to not allow junk to get in there and also as a "bump stop" to not let the rack turn to far if I remember right.
Logged
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.
*

Offline davidpaul

Re: Non powered steering rack
« Reply #3 on: October 16, 2016, 01:05:27 PM »
Quote from: chuddly on October 14, 2016, 08:19:01 AM
I assume you have the boot that goes over that??  That bushing/spacer acts both as a scraper to not allow junk to get in there and also as a "bump stop" to not let the rack turn to far if I remember right.
Yes there's a boot over it, I was giving her a good service and noticed there was some movement in the rack so I pulled the boot back to have a look, added some extra grease at the same time, I'm happy there's nothing wrong with it now
Logged
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
*

Offline bezerk1

Re: Non powered steering rack
« Reply #4 on: December 07, 2016, 01:05:33 PM »
I have the boot off of my steering rack to change a tie rod.  My bushing is free floating just like yours in the picture.  At first I thought there was a missing snap ring but, there is no groove in the housing for one.  I guess that's just how it is.  I'm also going to repack mine with a handful of grease too.
« Last Edit: December 07, 2016, 01:07:04 PM by bezerk1 »
Logged
*

Offline davidpaul

Re: Non powered steering rack
« Reply #5 on: December 07, 2016, 01:42:56 PM »
 I put extra lube in mine too
Logged
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
Pages: [1]   Go Up
« previous next »