0 Members and 1 Guest are viewing this topic.

*

Offline locknload

need clutching advice
« on: April 08, 2016, 09:44:20 PM »
Going to the St. Anthony dunes, will be using sand tires on the rear only, any clutching ideas or should the stock settings work ok? I believe the dunes are about 5000'. Its a 2015 800ex



2015 zforce 800 EPS
Super atv flip up windshield
Rodins doors
24" light bar
Special built seat for my dog

*

Online NMKawierider

Re: need clutching advice
« Reply #1 on: April 08, 2016, 11:37:56 PM »
Closer to sea level I would say leave it alone but at 5K, better either clock the secondary to C1 or put some 22-23 gram sliders in the primary.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline locknload

Re: need clutching advice
« Reply #2 on: April 09, 2016, 01:18:09 PM »
Thanks, I think I'm going to move the secondary spring as you suggested cause we are only riding there for a day but do you know the stock setting now is it b2?
2015 zforce 800 EPS
Super atv flip up windshield
Rodins doors
24" light bar
Special built seat for my dog

*

Online NMKawierider

Re: need clutching advice
« Reply #3 on: April 09, 2016, 01:52:38 PM »
Thanks, I think I'm going to move the secondary spring as you suggested cause we are only riding there for a day but do you know the stock setting now is it b2?
The factory setting is B1, not B2. Next up is A1 but we want to go one farther to C1. Here's the chart:

2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline locknload

Re: need clutching advice
« Reply #4 on: April 09, 2016, 07:14:44 PM »
Great, thanks alot!
2015 zforce 800 EPS
Super atv flip up windshield
Rodins doors
24" light bar
Special built seat for my dog

*

Offline ysoserious24x7

Re: need clutching advice
« Reply #5 on: May 02, 2016, 07:31:49 AM »
Thanks, I think I'm going to move the secondary spring as you suggested cause we are only riding there for a day but do you know the stock setting now is it b2?
The factory setting is B1, not B2. Next up is A1 but we want to go one farther to C1. Here's the chart:


Any specific link on re clocking the clutches im thinking about bigger tires

*

Offline gwingo12

2015 Zforce 800EX
Full CF Moto Windshield
UNI Air Filter
(2) 6x9 Infinity Speakers
(2) 6.5 Infinity Speakers
(2) Polk Audio Tweeters
Kenwood 4 channel amp
Kenwood Bluetooth amp

*

Online NMKawierider

Re: need clutching advice
« Reply #7 on: May 02, 2016, 09:55:22 AM »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube