Hello, where is the fuse box on a 2016 CFMoto Zforce 800?  I saw it should be under the steering column but do not see it.  I have a 2020 and it is located under the hood with the insert taken out 

[2015 Z Force 800 53/Trail EPS]

The distribution fuse box IS clipped to the right side of the steering column on a bracket that holds the column. It just looks like a connector as it uses mini fuses. I had a pic of mine as they were all the same up to 2017. The main fuse is under the driver's seat, rear compartment. All the relays will be on the passenger side behind the glovebox. And of course the starter solenoid is on the frame kinda behind the driver's rear tire.

     

[2016 CFMoto ZForce 800 Fuse Box, Relay & Starter Solenoid Locations]

2016 CFMoto ZForce 800 Fuse Box, Relay & Starter Solenoid Locations

For anyone finding this thread while troubleshooting a no-crank, no-start or electrical problem, here is a consolidated summary of the component locations discussed above.


2016 ZFORCE 800 ELECTRICAL COMPONENT LOCATIONS

Based on the information shared by members in this thread:

• Distribution fuse box: Clipped to the right side of the steering-column bracket. It can look similar to an electrical connector because it uses mini fuses.
• Main fuse: Located under the driver's seat in the rear compartment.
• Relays: Located on the passenger side behind the glovebox.
• Starter solenoid: Mounted to the frame in the area behind the driver's rear tire.

Members also reported that this general electrical layout applies to the earlier-generation ZForce 800 machines through approximately the 2017 model year.

Note: Component locations can vary by model year and configuration, so verify the layout on your specific machine before replacing parts or modifying wiring.


IF YOUR ZFORCE 800 WILL NOT CRANK OR START

If you are looking for the fuse box, relay or starter solenoid because the machine will not start, use the complete troubleshooting guide here:

CFMoto ZForce 800 Won't Start or Hard to Start – Troubleshooting Guide

The guide covers:

• Battery voltage and battery condition
• Battery terminals and grounds
• Starter relay and starter-solenoid diagnosis
• No-crank conditions
• Crank-but-won't-start conditions
• Fuel-pump and fuel-pressure checks
• Ignition spark
• Electrical connections and sensors

WIRING INFORMATION

Additional electrical-system discussion can be found here:

2015 CFMoto ZForce 800 Wiring Diagram Discussion


MORE ZFORCE 800 RESOURCES

For owner's manuals, maintenance information and additional troubleshooting guides:

CFMoto ZForce 800 Resources: Manuals, Maintenance & Troubleshooting