If i'll remove the driver seat & put a powerful vacume cleaner

Started by iec, November 29, 2016, 02:14:52 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

iec

***
Full Member
Posts: 31
Logged
iec
Full MemberPosts: 31
after driving a very dusty area -will it suck & clean the dust out?
Does the CVT unit  close on the other side?
I'm ttying cleanning it without openning the CVT casing.
8-)
No Risk No Fun.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
#1
No..well... not very much anyway. At least on my Z8 I have tried with a gas blower on the intake while having my shop vac on the discharge end...running and not running.. before opening and found that I may have got the loose stuff out but all the stuff packed in the primary and the back side of the secondary along with stuff laying on the bottom was still there. This is why I went to a full filter system on the intake.

But...I did not try putting a vacuum on the intake behind the seat so..give it a try and see. Can't hurt. :)


2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

iec

***
Full Member
Posts: 31
Logged
iec
Full MemberPosts: 31
I'll give it a try  :-) 
Lets say it will not take effect...is there any video or a link with good tutorial how to open the CVT cover & clean it?
No Risk No Fun.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Quote from: iec on November 30, 2016, 03:13:26 AM
I'll give it a try  :-) 
Lets say it will not take effect...is there any video or a link with good tutorial how to open the CVT cover & clean it?
You van always watch the clutching videos in the how to section. They will show what to remove. Basically seats, center and left-side plastics, left wheel and battery cover. Then you can take the cover bolts out.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube