Of course the dumb ass did it - so now - Parts for Roll cage?

Started by caj13, August 15, 2022, 02:07:57 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

caj13

**
Junior Member
Posts: 3
Logged
caj13
Junior MemberPosts: 3
OK -  so I knew it was a gamble -  let my 18 year old nephew take out the 800 z force trail,  AFTRE giving him a detailed explanation on how prone they were to rolling -  yadya yada yada -  so of course the dumbass rolls it in less than an hour!

as far as I can tell -  other that trail rash on the plastic - the structural issue is he creased the door bar on the passenger side -  so functionally the door latch will not work -  but more important the structural integrity is gone.

Looks to me like its a bolt in bar.  But I have no idea how I would get my hands on a replacement?  Can the dealer get access?  on line searches so far are nothing but aftermarket mirrors lights and windows. 

anyone with some insider knowledge / experience -  willing to share?

thanks

doug80638

*****
Guru
Posts: 930
Logged
doug80638
GuruPosts: 930
You didn't specify a year, so I search on 2017.

Hopefully this will get you some part numbers ....

https://alpha-sports.com/cfmoto_parts.htm?fpg=/cfmoto/2017/2017%20ZFORCE%20800%20TRAIL/06.htm
2017 Zforce 800 - Red
SuperATV Flip windshield
Tusk soft rear window
Uni-Filter foam air filter
Bandit springs

caj13

**
Junior Member
Posts: 3
Logged
caj13
Junior MemberPosts: 3
Thanks Doug -  sorry its a 2022,  but it looks right,  I'll confirm it has not changed

thanks again

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Yeah you can buy the complete or partial cage components through any CFM parts house....or even have one custom made..lower..like many are doing to the OE cages. Pull the plastics and you can get to all the mount points. 
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

glenlivet

*****
Guru
Posts: 678
2017 Z-Force 800 Trail
Logged
glenlivet
GuruPosts: 678
Looks like 1 and 4 are the main back cage and front cage parts. Pricey at 800 bills for both, if there's that much damage! Look under 'Cab Frame'

https://partsfinder.onlinemicrofiche.com/mainstreetcycles/showmodel.asp?type=13&make=cfmotoutil&a=62
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Not that bad..
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

caj13

**
Junior Member
Posts: 3
Logged
caj13
Junior MemberPosts: 3
Quote from: glenlivet on August 15, 2022, 08:20:22 PM
Looks like 1 and 4 are the main back cage and front cage parts. Pricey at 800 bills for both, if there's that much damage! Look under 'Cab Frame'

https://partsfinder.onlinemicrofiche.com/mainstreetcycles/showmodel.asp?type=13&make=cfmotoutil&a=62

Yeah - thanks for that - the piece I need is actually showing up in the door diagram -  # 37,  only 60 bucks -  i got off cheap

glenlivet

*****
Guru
Posts: 678
2017 Z-Force 800 Trail
Logged
glenlivet
GuruPosts: 678
 ;D
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill