« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline davidpaul

Electric
« on: October 05, 2017, 03:18:04 PM »
Does anyone know if there is a wire connection which is on when the ignition switch is in the run or on position but off when in the start position
Logged
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
*

Online NMKawierider

Re: Electric
« Reply #1 on: October 05, 2017, 04:27:51 PM »
Quote from: davidpaul on October 05, 2017, 03:18:04 PM
Does anyone know if there is a wire connection which is on when the ignition switch is in the run or on position but off when in the start position
Doesn't look like it per the wiring diagram.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline bezerk1

Re: Electric
« Reply #2 on: October 05, 2017, 04:44:20 PM »
Seems like this can be accomplished with a simple relay in the normally closed position.
Logged
*

Offline davidpaul

Re: Electric
« Reply #3 on: October 06, 2017, 03:47:27 AM »
Quote from: bezerk1 on October 05, 2017, 04:44:20 PM
Seems like this can be accomplished with a simple relay in the normally closed position.

Ok, would I use one of the 5 pin relays ?
« Last Edit: October 06, 2017, 04:37:39 AM by davidpaul »
Logged
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
*

Online NMKawierider

Re: Electric
« Reply #4 on: October 06, 2017, 08:43:19 AM »
Yes. So..what is it that you want to have power in the run position but not while cranking?
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline davidpaul

Re: Electric
« Reply #5 on: October 06, 2017, 09:55:56 AM »
Quote from: NMKawierider on October 06, 2017, 08:43:19 AM
Yes. So..what is it that you want to have power in the run position but not while cranking?

I have added a small battery to run two lights so I don't need to worry about draining the main battery when parked.
The split charge relay needs to be disconnected from power source when the engine is cranking
Logged
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
Pages: [1]   Go Up
« previous next »