0 Members and 1 Guest are viewing this topic.

*

Offline drittal

Doors and Skids
« on: March 27, 2016, 09:21:10 AM »
The Boss, AKA my wife, says any SxS I get has to have doors and a skid plate.

I see Rodin makes doors for the Zforce. How do you guys like them?

Also, will an Iron Baltic skid plate without the A arm guards fit a 51.5" machine?

*

Offline NMKawierider

Re: Doors and Skids
« Reply #1 on: March 27, 2016, 09:24:52 AM »
The Boss, AKA my wife, says any SxS I get has to have doors and a skid plate.

I see Rodin makes doors for the Zforce. How do you guys like them?

Also, will an Iron Baltic skid plate without the A arm guards fit a 51.5" machine?
Rodin's doors are top-drawer. Very nice. And the skids should fit no problem as that area is the same for both ex and the 53s.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline drittal

Re: Doors and Skids
« Reply #2 on: March 27, 2016, 09:29:23 AM »
How do they latch?

*

Offline NMKawierider

Re: Doors and Skids
« Reply #3 on: March 27, 2016, 11:26:49 AM »
How do they latch?

They use a latch something like a car door in that you just shut it. Then pull a release lever to open. They are good quality.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Flipper

Re: Doors and Skids
« Reply #4 on: April 04, 2016, 12:06:34 PM »
I have a set and they are awesome.  Very easy to install.  They bow out a bit to match the curve of the fender flares.  Plus, with the exposed frame on the inside, lots of ideas for storage pouches. 

I too am in the market for a skid plate,  have not found one I like yet. Would like to find one that incorporates rock sliders.  My rockers are taking a beating....
2015 Zforce 800EX EPS
Synthetic Winch Rope (Orange)
36" LED up front
12" LED out back
Pyle 600 watt 2 channel Amp with Bluetooth
2 Polk Audio speakers
1/2 windshield
UNI air filter

2006 Polaris Sportsman 700 Twin EFI

*

Offline Cosmosdan

Re: Doors and Skids
« Reply #5 on: April 05, 2016, 02:50:01 AM »
Check out iron baltic for skid plates. They do wrap up the sides. Made of thick alum. If you have any questions, they are very good about getting back to you and I can't say enough about how great the people are there. They helped me out with hardware and missing parts from a set I got from an old vendor of theirs. It was easy to see why they dropped him. They made it right with me even though they didn't have to. Sent me everything I needed for the cost of shipping.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline locknload

Re: Doors and Skids
« Reply #6 on: April 05, 2016, 09:38:44 AM »
Rodin doors are top notch, look great, fit great but keep in mind that the colors of the decals do not exactly match, on my machine the black is glossy and the black on the door is flat also the terquois on mine is alot darker then the terquois on the door but over all it looks great and functions even better.
2015 zforce 800 EPS
Super atv flip up windshield
Rodins doors
24" light bar
Special built seat for my dog

*

Offline Flipper

Re: Doors and Skids
« Reply #7 on: April 05, 2016, 12:02:42 PM »
Check out iron baltic for skid plates. They do wrap up the sides. Made of thick alum. If you have any questions, they are very good about getting back to you and I can't say enough about how great the people are there. They helped me out with hardware and missing parts from a set I got from an old vendor of theirs. It was easy to see why they dropped him. They made it right with me even though they didn't have to. Sent me everything I needed for the cost of shipping.

What is the Part Numer and price for the one from iron baltic ?  I checked out the website and they did not list CFMOTO.
2015 Zforce 800EX EPS
Synthetic Winch Rope (Orange)
36" LED up front
12" LED out back
Pyle 600 watt 2 channel Amp with Bluetooth
2 Polk Audio speakers
1/2 windshield
UNI air filter

2006 Polaris Sportsman 700 Twin EFI

*

Offline NMKawierider

Re: Doors and Skids
« Reply #8 on: April 05, 2016, 12:12:35 PM »
Check out iron baltic for skid plates. They do wrap up the sides. Made of thick alum. If you have any questions, they are very good about getting back to you and I can't say enough about how great the people are there. They helped me out with hardware and missing parts from a set I got from an old vendor of theirs. It was easy to see why they dropped him. They made it right with me even though they didn't have to. Sent me everything I needed for the cost of shipping.

What is the Part Numer and price for the one from iron baltic ?  I checked out the website and they did not list CFMOTO.

Hmm..how about this:  http://www.ironbaltic.com/atv-accessories-catalog-canada/group_id/328/
« Last Edit: April 05, 2016, 12:14:20 PM by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube