2017 Zforce 800 EX EPS wiring Diagram

Started by [email protected], August 26, 2021, 05:56:28 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

[email protected]

**
Junior Member
Posts: 2
Logged
[email protected]
Junior MemberPosts: 2
I did a bonehead move. :-[
Dead battery, removed but didn't mark wiring. 4 are simple, 2 are red, 2 are black, 1 is black connector with 2 red wires going to that black connector. So, wonder where that one goes?
Thanks!

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
Quote from: [email protected] on August 26, 2021, 05:56:28 PM
I did a bonehead move. :-[
Dead battery, removed but didn't mark wiring. 4 are simple, 2 are red, 2 are black, 1 is black connector with 2 red wires going to that black connector. So, wonder where that one goes?
Thanks!
For the positive, there should be one large red starter cable, one large red winch cable and two smaller #10 red with a stripe-one is systems power the other is power steering motor power. Those may be together in one connector. Rule-of-thumb, If RED is the main color, it's positive. If it's Black or white off the battery...it's negative.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

[email protected]

**
Junior Member
Posts: 2
Logged
[email protected]
Junior MemberPosts: 2
Thanks, its exactly what I thought. Easier to ask an expert than to smoke some electronic component. :)
Larry