Can someone tell me how to remove the plastic pins that hold a lot of the panels together without destroying them . I know that you are suppose to remove the centre then pull them out ,so far I have managed to get one out and not totally ruin it .

[2015 Z Force 800 53/Trail EPS]

Use push pin plyers. You can get then several places including Harbor Freight. They look like this but come in lots of styles and angles:

http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_16183.jpg

[2015 Z Force 800 53/Trail EPS]

When you need replacements, these work pretty good. The heads are a little larger and rounded and the shanks are .25mm larger but they work fine.

https://www.amazon.com/GOOACC-Retainer-Fastener-Scrambler-Sportsman/dp/B008427D88?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

Thanks I think it would be worth buying the pliers  , because we all know I will be removing panels from time to time

[2015 Z Force 800 53/Trail EPS]

Thanks I think it would be worth buying the pliers  , because we all know I will be removing panels from time to time

Yes, a must have...along with about three bags of push pins. I have four different kinds of P.P. plyers but I always grab this one first.

I use these mini cutters, the shape and curve of the cutting end gets under the head and lifts the center up very easily.

I just use side cuts also.  I may pick up some push pin pliers also but I have never had a problem just using the side cuts either.

Thanks guys . I have not had much luck with just using a couple flat screwdrivers .

Albertco where in NB? I live in Fredericton!

I live in Hillsborough N B just south of Moncton

I got my pullers at Harbor Frieght years ago when I got my commander but pins are similar

They still have them. They're $9.99.  Think I'll stop and pick up a pair.