[tmtex]

I ordered another just in case. Maybe Uni will make one someday

Hopefully. Can you get some photos of where and how the filter sits in the air box..without it being installed and a full set of measurements of the filter...like length, width, flange opening size exactly?

Here is the UNI 8709 installed. Whats circled in purple is to big for the box, meaning you have to push on the cover to get it to close. It the bottom plastic/rubber that is to big. Its about 7 in long where as the stock is maybe 10-12 in. Inlet is 2.5 in. The yellow circle is where the stock one goes to.

[NMKawierider]

I meant measure the factory filter. With that I can go "in search of" something that will work as a direct replacement.

[tmtex]

I meant measure the factory filter. With that I can go "in search of" something that will work as a direct replacement.

I dont keep it here at this house. Can some one measure it ?

[Super 8]

https://cfmotousaparts.com/product/air-filter-cf-moto-direct-fit-aftermarket-0800-112000-00001/

[Robbbb55]

I am the person who sent in the OEM picture of the 2023 800 filter.  Unit is at other house and will try to get measurements next week. 

[smitty42]

I am the person who say that it was a Donaldson, my mistake.  I was led to believe that it was basically a Donaldson style filter.
With the relocation of the air inlets for both the CVT and engine with the frog style pre-filter let's hope this takes care of the dust issue.
If it ever stops snowing/raining and the trails dry out it and we get into the Owyhee dust trails it will answer some questions.

[tmtex]

Stock filter is 9.5 long, 5 in wide. 2.5 inlet

[Robbbb55]

Here you go.  2023 800 trail air filter pics /measurements.  the filter slides on the port on the right without a clamp and the right side pushes into place and held firm.

[NMKawierider]

Thanks...I'll start looking.