I am wanting to know where the purple wire at starter solenoid gets is ground to engage solenoid. What components does the signal go thru? Thanks

[2015 Z Force 800 53/Trail EPS]

On the older ones it ises a common ground used bu the other things like lights and ends up with the main ground which is bolted to the engine case..on the older ones its one of the front CVT cover bolts where the main cable and two other grounds come together.

So the purple wire goes straight to ground? it doesnt go thru any switches before grounding?

[2015 Z Force 800 53/Trail EPS]

So the purple wire goes straight to ground? it doesnt go thru any switches before grounding?

Does look like it goes through a normally close relay, Aux 2, before connecting to that common ground.

Thank you! Where did you get this wiring diagram? I can't find one anywhere

[2015 Z Force 800 53/Trail EPS]

Thank you! Where did you get this wiring diagram? I can't find one anywhere

Before 2018 you could find manuals and wiring diagrams for CFM more readily but after that they tightened-up and now it's almost impossible. This one is from the 2014-2017s so it won't be exactly the same as your 22.

Thank you! Where did you get this wiring diagram? I can't find one anywhere

Before 2018 you could find manuals and wiring diagrams for CFM more readily but after that they tightened-up and now it's almost impossible. This one is from the 2014-2017s so it won't be exactly the same as your 22.

The wiring diagram in the 2023 Gen2 manual is virtually useless too.  It is very low resolution and most of the labels are close to unreadable.  I've tried blowing them up, but given the low resolution of the originals all I end up with a larger blurry versions.  No doubt the dealers have access to better manuals and diagrams that the rest of us can't access.