[Mrmatt]

My H indicator has quit working.  I have searched all over and can’t find a wiring diagram.  Can anyone help ?

[NMKawierider]

My H indicator has quit working.  I have searched all over and can’t find a wiring diagram.  Can anyone help ?

Here's a link. Probably have a bad selector switch. It just allows each position LED to ground depending on that position you are in. LEDs last a long time so..but not the selector switch. The H LED is the Orange/Blue wire. Ground it at the switch and if the light comes on..you have your answer, if not, the problem is up-stream from there. Link good for 48 hours so download it soon.

https://acrobat.adobe.com/link/track?uri=urn:aaid:scds:US:d2c75289-e759-4365-bf53-903e6a297bd4

[Mrmatt]

That’s awesome.  Thank you .  Now to locate the switch.

[NMKawierider]

That’s awesome.  Thank you .  Now to locate the switch.

It looks like this..note the two bolts...on the back side of the engine case..that's the side that the drive line comes out of going to the front.

https://www.google.com/url?sa=i&url=https%3A%2F%2Fwww.ebay.com%2Fitm%2F353523712086&psig=AOvVaw0eqni_LpwzRWjD3B_yU_Bi&ust=1645391417414000&source=images&cd=vfe&ved=0CAsQjRxqFwoTCJjMpovXjPYCFQAAAAAdAAAAABAD

[Mrmatt]

Found it !  Tested i and all selections go to ground when selected.  I tried grounding each wire and each light illuminated but the H.  I will follow the wire up to the display and check for breaks. 

[NMKawierider]

Found it !  Tested i and all selections go to ground when selected.  I tried grounding each wire and each light illuminated but the H.  I will follow the wire up to the display and check for breaks. 

Hope it's not a problem in the pod...but more often..it is.

[Mrmatt]

Tested the last connector before the panel and wire grounds when switched to H but light still does not illuminate.  I guess it is the led light.  Are they repairable?

[NMKawierider]

Tested the last connector before the panel and wire grounds when switched to H but light still does not illuminate.  I guess it is the led light.  Are they repairable?

If the pod can be taken apart they are just soldered in usually so..yeah. Most people with a pod problem just replace the whole thing though.

[Mrmatt]

Geeze… this is a 2018 not 2017.  Are there any wiring differences ?  I notice there are reverse lights in the tail light but nothing on that diagram.  Thanks for all your help !

[Mrmatt]

Above is the link to the diagnosis , gauge removal and replacement without removing the entire front end.

[NMKawierider]

Damn..what a MF'r. Thanks for this video. I copied it to the How-To Videos.