Hi All,

I have a 650MT/Adventura here in the states. I went to go first and check my mileage before going out for a ride. The fuel pump primed completely and I did not start the bike. After 30 minutes when I did go back and try to start the bike the fuel pump would not prime and not start at all. When flipping the starter switch I can hear the starter relay click so I do not think it is that. The battery is showing 12.6 volts. Any suggestions here as to what the issue could be? Low battery, bad fuel pump, bad kill switch etc?

[2015 Z Force 800 53/Trail EPS]

work the kill switch a couple of times...make sure it is in the run position.

It still isn't that. I rocked it a few times and nothing worked.

UPDATE:

Turns out it was a bad ECU that was causing this issue. Seemed to be a defective ECU that the bike was installed with. Took it to the dealer
and they took care of it and it was covered under warranty.

[2015 Z Force 800 53/Trail EPS]

Good news. Glad to hear it was taken care of.