0 Members and 1 Guest are viewing this topic.

*

Offline troyg3

Alignment
« on: July 25, 2017, 02:37:50 PM »
Since I got my Z6 I have noticed that it likes to pull pretty hard to the right so i'm assuming the alignment is off. Not knowing all that much about working on these I was hoping someone could give me a good starting point for where to look for the problem. Thanks!

*

Offline NMKawierider

Re: Alignment
« Reply #1 on: July 25, 2017, 03:43:16 PM »
The only adjustment is the toe and that won't make it pull one way all the time. Off enough it will dart or road wander though. A full-time pull in one direction indicates either the camber or caster is off..which means something is bent like an a-arm, frame or something is binding such as brakes on that wheel, bad wheel bearing or even a dry or binding CV joint. There is one other thing that can make one pull all the time one direction and that is a bent or damaged torque bar in the power steering unit...if one had power steering.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline REDRIDER

Re: Alignment
« Reply #2 on: July 26, 2017, 06:50:29 AM »
check your tire pressure too.