Good Evening

We have a 2017 CF Moto 400.  The front wheel got bent and we need to replace it. The OEM part cost $157.00.  Not paying that. Does anyone know what size (I know its 12 inch) wheel I need to order from a aftermarket supplier? Like bolt pattern, back spacing...ect?

Thank you

Walkerboh

[2015 Z Force 800 53/Trail EPS]

One of the little truths is, no aftermarket wheel will ever match the factory in offset..especially CFM's. With that being said you can look on the back side of the wheel and on one of the spokes there should be some size and offset info like this:



and:



Take that data to most any of the converters on the web and you can get your full standard offset. It will look like this.




On this, the 6.33 is the part the goes from the hub in. The rest of the 8"s is the part the goes out. So for example, this 8" CFM wheel off my Z has an offset of 6.33+ 1.67. Never going to find an aftermarket wheel like that. The closest you will find in an 8" is 5+3. I have yet to see a 6+ anything out there. But maybe there is another supplier of Chinese wheels that can match these..If you find one please let us know.


Here's a link to a good converter:


https://www.customwheeloffset.com/tire-wheel-backspacing-offset-calculators

Thank you for the information... Mine reads 12x6.0  AT 01 17. Looking for this size rim. I will let you know what I find.

Thank you again

Walkerboh