[Utvtf]

Good afternoon.

I'm new to the forum, I'm writing from Spain, sorry about my English.

I have been consulting the forum, and I see that they talk about the measures of the original tires.

The conclusions I've drawn from the forum are:

- Factory front wheels are 7" wide with a 4+3 offset.

- Factory rears are 8" wide with a 5+2 offset.

Is that correct?

But I can't get an exact reference rim model.

I'm looking for a cheap spare tire,

I wanted to consult you about an exact model of the tire:

Would that model be suitable for the front?

https://www.ffitsin.com/index.php?main_page=product_info&products_id=659740

I see that it has the same offset as the original on the back.

So I guess I'll have no problem putting it in the back.

My fear is that the rim rubs on the inside with the brakes or similar.

Thank you very much.

[glenlivet]

4+3 is a solid rear axle wheel and shouldn't fit an independent rear suspension quad or SXS.

[Utvtf]

Thank you for your answer.

I don't know, I just got this information off this forum.

And I can't know which spare tire without being original I can use

[NMKawierider]

I can tell you that the fronts are 7" and the rears are 8" and the offsets are not standard...I could tell you but that would take too much time.. so you will never find them in the aftermarket world. IF you just want a spare, get one that will work on both. Get a 7" with a 5+2 offset. Of course it will have a 4/110 pattern with lug-centric centering...ie tappered lugs.